Problem solving 287
[190]Situation A: No mechanicalerrorSituation B: Mechanicalerror
4If there are, remove the tape strips in th e reinforcement unit.
Note: If the protectionsheet is not on the reinforcement strip (see situation
A in figure 190), there is no mechanical error and you sho uld insert a new
tape roll as described in ‘A new tape roll’ on page 254. If this error
frequentlyoccurs you shouldcall the Océ service organisation(see ‘Other
problems (call service)’ on page 288).
5Removeall tape between the rollers and knives (see figure191).
[191]Removing the tape
6Lead a new trailingedge of tape between the rollers and knives. For more
information see ‘A new tape roll’ on page 254.