Oce North America TDS600 user manual System Administrator settings

System Administrator settings

In order to perform special system administrator functions, you must log into the Settings Editor as a system administrator (see ‘User modes’ on page 117).

Note: When you are finished, make certain you log out of the System administrator mode of the Settings Editor to prevent unauthorized use of the Océ TDS600.

▼Make system administrator settings in the Settings Editor

1 Maximize the Settings Editor on the screen.

2Log in as system administrator.

See ‘User modes’ on page 117 for more information about logging into the Settings Editor.

3Click on one of the top buttons to display the desired group of settings.

4Select the setting you want to update in the tree structure.

5Update the setting in the update area, as required.

Note: A few settings, such as the default pen settings, are made directly from the tree structure area.

6Click on the ‘Apply’ button.

The new value is now applied for the setting

7Log out of the System administrator mode when you are finished updating settings.

See ‘Océ Power Logic: Settings Editor (for the key operator)’ on page 139 for more information about the Settings Editor for the key operator.

Océ Power Logic: Settings Editor (for the system administrator) 205