UsetheOcéTDS600toprint 25
▼
▼▼
▼Switch the Océ TDS600 printer on
1Setthe on/offswi tch at the rear of the printer to position ‘1’ , (see figure 2). The
greenLED will be on.
2The message ’Ready to print’ appears.
▼
▼▼
▼Switch the Océ Power Logic controller on
1Press the on/off button on the controller, (see figure 3).
2Pressthe on/off button on the monitor
The controller starts up.
Switch the Océ TDS600 printer off▼
▼▼
▼Switch the Océ TDS600 printer off
Note: Ensure that the engine does not run .
1Set the on/off switch at the rear of the printer to position ‘0’.
▼
▼▼
▼Switch the Océ Power Logic controller off
1Select the ‘Shut down’ option from the Océ System Control Pane l.
2Switch offthe controller and the monitor (see figure 3).
Note: Waitat lea st 5s econds before you restart the Océ TDS600.