Oce North America TDS600 user manual Get the account log file via FTP in a dos box

[124] The accounting directory with the account log file on the Océ TDS600 system

▼Get the account log file via FTP in a dos box

1Launch an FTP client.

2Enter the ‘ftp’ command.

A DOS box now appears with the FTP prompt.

3Enter the ‘Open’ command followed by either the registered name of the Power Logic Controller or the IP address (for example: 194.2.66.146) to connect to the Controller and press Enter: ‘open 194.2.66.146’.

Note: Instead of performing steps 2 and 3 you could also enter “ftp host_name” in the FTP client.

The connection with the Controller is now established and a window appears asking you for a user name.

4Enter your user name ‘anonymous’, and enter as your password also ‘anonymous’.

A connection is now set up for the default user ‘anonymous’.

Note: As there is no registered user, you can simply press Enter to initiate the connection.

5Set the transmission mode to binary by entering ‘binary’.

6Go to the ‘logging’ directory using the following command: ‘cd logging\’.

7Get ‘20001011.csv’ or ‘20001110.txt’ depending on the file format setting, (see ‘File format’ on page 201).

8Quit FTP by entering the ‘bye’ command.

Océ Power Logic: Account logging 229