Oce North America TDS600 user manual Remove the trailing edge of the old tape see figure

3Remove the trailing edge of the old tape (see figure 145).

[145] Removing the trailing edge of the old tape

4Open the front side plate of the roll holder by unscrewing the green knurled nut and remove the old kernel.

Note: It is recommended that you clean the reinforcement knives before you place a new roll. See ‘Maintenance of the reinforcement knives’ on page 263 for more information.

5Place the new roll and close the side plate. Make certain that the roll is placed with the holes to the back and the protection sheet to the front (see figure 146).

[146] Placing the new roll

256 Océ TDS600 Multifunctional Digital System User Manual