Before you begin

You must switch on the Océ TDS600 printer, scanner and the Océ Power Logic controller before you can print. You do not have to use a specific order in which you switch on or off the Océ TDS600 printer, scanner and the Océ Power Logic controller.

Note: Chapter 1 (see ‘Printer operator panel’ on page 26) explains the printer operator panel.

Switch the Océ TDS600 printer and scanner on

You switch on the Océ TDS600 printer and scanner with the on/off switch. The switch of the is at the rear of the printer. The switch of the scanner is underneath the original feed table.

[7] On/off switch on the printer

38

Océ TDS600 Multifunctional Digital System User Manual

Page 38
Image 38
Oce North America user manual Before you begin, Switch the Océ TDS600 printer and scanner on