Printer operator panel actions

On the Océ TDS600 printer operator panel you can perform a limited number of actions:

Set the media type

Set the media type for manual feeder

Set the media size

Set a special media indication

Stop a print job

Select the preferred language

Make off-line folding settings

Clean the reinforcement knives

Media type and size on the printer

One of the features of the Océ TDS600 printer is the automatic media change function. This function allows the printer to switch to another roll of the same format and copy material when the roll or sheet feeder becomes empty during printing.

Note: Since the Océ TDS600 Printer cannot detect the loaded copy material type and format itself, you have to specify type and size after you (re)load media, as described in ‘Media’ on page 240.

See ‘List of available material types and sizes’ on page 309 for an overview of all materials that can be used on the Océ TDS600 Printer.

Set media type

1Press the on line button on the printer operating panel to put the printer off line. The message ‘Off line’ is displayed in the status window.

Use the Océ TDS600 to print

29

Page 29
Image 29
Oce North America TDS600 user manual Printer operator panel actions, Media type and size on the printer, Set media type