Oce North America TDS600 user manual Print cut method, Custom print length, Default roll format

Print cut method
Description	The Océ TDS600 determines the length and width of each
	digital image. The ‘Print cut method’ option allows you to se-
	lect one of the following default cut methods:
	Standard: The print length corresponds to a standard format,
	depending on the media width.
	Synchro: The print length is related to the length of the im-
	age. This is the factory default value. The minimum print
	length is 279 mm.
	Custom: The print length is defined by the user. The mini-
	mum length is 279 mm. The default value is specified with the
	‘Cut length’ option.
Min/max values	N/A
Menu path	Jobs - Print - Defaults - Sheet - Print cut method
Custom print length
Description	The ‘Default paper source number’ option allows you to de-
	fine the On the Océ TDS600 you can define a specific cut
	length.
	The specified cut length is used when the ‘Custom’ cut meth-
	od is selected. If custom cut is enabled the copy media length
	will only depend on this setting, thus any other influence is ex-
	cluded.
	The minimum cut length is 279 mm.
Min/max values	279 - 15,000 mm
Menu path	Jobs - Print - Defaults - Sheet - Custom print length
Default roll format
Description	Use ‘Default roll format’, to define the default media size for
	your print jobs.
	The default is A0.
	The following sizes are available:
	A0 to A4 (DIN range)
	36 inch (E+)
	ISO B1
	ISO B2
	Note: ‘Default roll format’ works only, when ‘Auto format’
	Off is selected in the Media section.
Min/max values	279 - 15,000 mm
Menu path	Jobs - Print - Defaults - Sheet - Default roll format

172 Océ TDS600 Multifunctional Digital System User Manual