Clear a jam in the belt unit

 

1 Open the door of the belt unit (see figure 179).

 

 

 

 

 

 

[179] Opening the belt unit door

2Squeeze the two green knobs in the upper section of the belt unit and open the plate (see figure 180).

[180] Opening the plate

3Remove any jammed printing material.

4Squeeze the two knobs again and put the plate in its original position.

280

Océ TDS600 Multifunctional Digital System User Manual

Page 280
Image 280
Oce North America TDS600 user manual Open the door of the belt unit see figure, Clear a jam in the belt unit