4Press the green knob inside the roll holder (on the right side) to release the locking mechanism (see figure 127) and remove the core from the holder.

34"

A0

36"

 

[127] Pressing the green knob

Note: You can place the new roll in the groove on top of the printer.

5Slide the roll holder in the new roll of material while pressing the green knob.

6Align the roll with the appropriate size indicator on the roll holder and release the locking mechanism. This line has to be completely visible.

7Use both hands to place the holder in the roll compartment (see figure 128).

left view

[128] Positioning the roll

242

Océ TDS600 Multifunctional Digital System User Manual

Page 242
Image 242
Oce North America TDS600 user manual Left view