Oce North America TDS600 user manual Select the input mode

[16] Selecting the required media

Note: You can also select the desired media from the ‘Custom’ section, if this setting has been defined for this (see figure 14 on page 45).

Select the input mode

You can use the ‘Input mode’ setting to specify how a job will be sorted: the ‘Single sheet’ option treats each sheet as a separate job. ‘Multiple sheets’ produces the specified number of copies for each sheet in a job and then continues with the next sheet. Graphically that would look something like this:

1 1 1

2 2 2

3 3 3

4 4 4

5 5 5

Note: An important characteristic of ‘Multiple sheets’ is that, if this setting is selected, the active job is kept together and treated as a whole. In this case the job cannot be interrupted by a high-priority copy job, and there will be no risk of getting mixed output.

‘Set’ produces one copy for each sheet in a set and then continues with the next copy of the entire set, as follows:

1 2 3

1 2 3

1 2 3

1 2 3

1 2 3

The current input mode can be closed by pressing the Stop button.

The currently selected input mode is indicated by the ‘●’ symbol.

▼Select the input mode

1Select the ‘Feeding’ card in the ‘Original’ section.

2Select the desired media with the ‘Input mode’ function button.

Use the Océ TDS600 to copy 49