254 Océ TDS600Multifunctional Digital SystemUser Manual
Maintenance of the reinforcement unit
This section covers maintenance activities for t he optional reinforcement unit
of the folder,such as:
■Inserting a new tape roll
■Emptying the waste box
■Cleaningthe reinforcement knives
Attention: Only use the original reinforcementstrips from Océ, to avoid
damage to the reinforcement unit.

A new tape roll

When the tape roll is empty while the engine is in stand-by,one of these
messages will appearo n the display:
■‘Loadreinforcement tape’
■‘Reinforcementunit empty’(if the engine was runningwhen the roll ranout
of tape).
When a tape roll is empty while the engine is running, this message will be
accompanied by a picture of the engine with the side door of the rei nforcement
unit blinking (see figure 142).
[142]No tape in reinforcement unit