40 OcéTDS600 Multifunctional DigitalSystem User Manual
The controller starts up.
Switch the Océ TDS600 printer and scanner off▼
▼▼
▼Switchthe Océ TDS600 printer off
Note: Ensure that the engine does not run.
1Set the on/offswitch at the rear of the printer to position ‘0’.
▼
▼▼
▼Switchthe Océ TDS600 scanner off
1Set the on/off switch at the front of the scanner to position ‘0 ’.
▼
▼▼
▼Switch the Océ Power Logic controller off
1Selectthe ‘Shut down’ optionfrom the System Control Panel.
2Switch off the controller and the monitor (see figure 9).
Note: Waitat lea st 5 seconds before you restart the Océ TDS600.