Oce North America TDS600 user manual Load rolls of copy material, Load paper

Load rolls of copy material

When a roll is empty during a print job, a ‘Roll empty’ message is displayed at the printer operating panel and on the System Control Panel application. You then have to load a new roll of print material.

		Note: Currently the following media are supported on the Océ TDS600:
		■ Plain paper (Red label plus) 75g/m2
		■ Plain paper (Red label) 110g/m2
		■ Transparent paper 90-95g/m2
		■ Polyester film (CPRF) 3.5mil
		■ Polyester film 4.5mil
		■ vellum (9020/9022) 20lbs.
		Caution: See Appendix B for more information about safely handling/
		placing rolls of print material in the printer.
▼		Load paper
	1 Open the appropriate roll compartment (see figure 126).

[126] Opening the appropriate roll compartment

2If necessary remove any scrap material from the paper roll compartment.

3Remove the roll holder from the paper roll compartment.

Media and supplies 241