Oce North America TDS600 user manual Get files via FTP

[49] The tempstore directory with the scanned files on the Océ TDS600 system

▼Get files via FTP

1Launch an FTP client.

2Enter the ‘ftp’ command.

A DOS box now appears with the FTP prompt.

3Enter the ‘Open’ command followed by either the registered name of the Océ Power Logic Controller or the IP address (for example: 194.2.66.146) to connect to the Controller and press Enter: ‘open 194.2.66.146’.

Note: Instead of performing steps 2 and 3 you could also enter “ftp host_name” in the FTP client.

The connection with the Controller is now established and a window appears asking you for a user name.

4Enter your user name ‘anonymous’, and enter as your password also ‘anonymous’.

A connection is now set up for the default user ‘anonymous’.

Note: As there is no registered user, you can simply press Enter to initiate the connection.

5Set the transmission mode to binary by entering ‘binary’.

6Go to the ‘tempstore’ directory using the following command: ‘cd tempstore\’.

7Go to the ‘scan’ directory if you want to retrieve a file from a destination on the local host,

or

go to the ‘unsent’ directory if you want to retrieve a file from ‘unsent’ folder on the local host.

8Get the data file (for example: bugatti.tif) via the ‘get’ command: ‘get bugatti.tif’.

9Quit FTP by entering the ‘bye’ command.

Use the Océ TDS600 to scan 85