UsetheOcéTDS600tocopy 53
Define settings for the next original
Youcan define the set tings for each original you want to copy. When
‘Automaticfeed’ is enabled,you should bearin mind that the originalis
automatically pulled into the scanner. If you want to be absolutely sure about
the settingsthat belong to an original, insert an originalwhen the settings are
correct.
Note: Toincrease yo ur versatility at the scanner input side, you can ask your
key operator to switch off Automatic feed. When using the scanner with
automaticfeed off, you must press the start buttonfor each new original to be
scanned. This offers you the possibility to change the settings for the next
original, even if you already put the original in place on the scanner feed table.
▼
▼▼
▼Define settings for the next copy job
1Select all settings required for the next original .
2Insert the next original.
If ‘Automatic feed’ is off, press the start button.
If ‘Automaticfeed’ is on, the original is fed automatically.
Note: Youcan enable or di sable this function from the ‘Scanner’card in the
‘Original’sec tion. See figure 15 on page 47.
Account logging
Foracc ounting purposes, the system is ab le to log job information for each job.
The job identification attributes and the number of print jobs are logged in the
account file. For more information on account logging (see ‘ Océ Power Logic:
Account logging’ on page 225)
Note: The accountsettings are only availableif the accounting optionis
enabled in the system configuration.