Oce North America TDS600 Belt unit, Enable reinforcement, Adjusting the side guides of the belt

The optional reinforcement unit supports all media sizes larger than A4. However, A4 size media can also be reinforced if you enable A4 reinforcement in the Settings Editor.

Note: Reinforcement is only possible with the Standard folding method.

See ‘Reinforcement unit’ on page 296 for more information about inserting a new tape roll and other maintenance issues.

▼Enable reinforcement

1Click on the ‘Jobs’ button in the Settings editor.

2Select the ‘Copy’ tab if you want to enable folding reinforcement for copy jobs or select the ‘Print’ tab if you want to enable folding reinforcement for print jobs.

3Open the ‘Defaults’ folder.

4Open the ‘Finishing’ folder.

5Select the ‘Folding reinforcement’ option.

6Enable folding reinforcement in the right part of the window.

7Click on the ‘Apply’ button to save any changes you have made.

Belt unit

A belt unit offers a large capacity and more flexibility. On the belt unit up to 100 A0 prints can be delivered offset stacked. You can adjust the side guides of the belt, depending on the width of the folded package.

See ‘Océ Power Logic: Account logging’ on page 225 for more information about selecting the belt for default print/copy/off line delivery.

Note: The belt unit can also be selected from the drivers (including Plot Director) or the copier operating panel. The remote command overrules the key operator setting.

▼Selecting belt as folded copy delivery on copier operating panel

1Open the ‘Finishing’ card in the ‘Copy’ section of the copier operating panel.

2Press the ‘Folding’ function button to select full folding.

3Press the ‘Folded copy delivery’ function button to select the belt.

▼Adjusting the side guides of the belt

1Loosen the nuts (see figure 201).

The folder 297