[13] ‘File’ section of the Océ TDS600 Copier

Change the operator panel language

It is possible to change the operator panel language. You can choose between two preferred languages.

To select a language

1Open the ‘Scanner’ card in the ‘Original’ section.

Press the ‘Language’ function button to set the needed language.

Settings on the Océ TDS600 Copier operator panel

On start-up of the Océ TDS600 Copier, the ‘Custom’ card is displayed (see figure 14).

The custom card gives access to the settings you defined in the Océ Settings Editor. This contains a number of settings which are direct accessible. The key operator defines the custom card in the Océ Settings Editor.

[14] The ‘Custom ‘ card on the scanner operator panel

Use the Océ TDS600 to copy

45

Page 45
Image 45
Oce North America user manual Change the operator panel language, Settings on the Océ TDS600 Copier operator panel