28 OcéTDS600 Multifunctional DigitalSystem User Manual
Buttons
With the buttons on the operator panel you can make a num ber of settings forthe Océ TDS600Printer, such as the media typeand size or the preferredlanguage.The followingbuttons are available:Button types
Function
Selection
buttons
The selection buttons are located immediately below the
graphicaldisplay. The left button can be used to activate one of
the main menu choices (Language, Folding or
Media) on theleft p artof the display.
Note: A shadowh ighlighting effectis used to indicate the ac-
tivemenu option.
The right selection button can be used to activate the options
onthe right part of the graphical display.
Note: Toidentify the active selection, the dotted line around
this selection is changed into an uninterrupted line and the
small selection triangles next to the specified option are no
longerdimmed.
Theseselection triangles indicate that you can select an option
from a predefined list with the help of the Up/Down buttons.
Up/Down
buttons
These two triangular buttons to the right of the graphical dis-
playare used to displaythe next or previousoption from the se-
lected menu choice and to select the desired option.
On line button By pressing the on line button you can put the printer on line
or off line. If the green light above the on li ne button is on, the
printer is on line; if this light is off, the printer is off line.
Stop button The red stop button is used to stop the present print job. After
this button is pressed, a dialogue will be displayed asking for
confirmation.
Note:The printing processdoes not stop instantaneouslysince
an umber of prints may already have been submitted to the
printerafter processing. The prints cannot be stopped.
Keybutton The greenkey button has no function.