Oce North America TDS600 user manual Section, Function and Arrow buttons, Button type

Buttons

With the buttons on the operator panel you can make a number of settings for the Océ TDS600.

The following buttons are available:

Button type
	Function
Start buttons	The green button marked with	is used to start the
	feeding of the original, or to re-start the copy process.
Numeric buttons	The buttons with numbers on the lower part of the oper-
	ator panel are used to enter numbers.
Correction button	The orange button marked with C, located at the bottom
	right of the operator panel. If you press the correction
	button once, the copy counter is set to the default (prob-
	ably ‘1’). If you press this button twice, all settings are
	reset to their default values.
Stop button	Pressing the red button to the left of the display stops the
	copy process for the current original. You can stop the
	original transport immediately when an original jam oc-
	curs.
Interrupt button	Currently not in use.

Section, Function and Arrow buttons

Apart from the above mentioned buttons, the operator panel of the Océ TDS600 Copier contains a number of other buttons. These include:

■Section buttons

■Function buttons

■Arrow buttons.

The section buttons are the four buttons located above the display. These buttons provide access to the ‘Custom’, ‘Original’, ‘Print’ and “File’ sections on the display.

Each section contains several functions (cards). These can be accessed with the help of the left most function button, which is also called the card selection button.

42 Océ TDS600 Multifunctional Digital System User Manual