Oce North America TDS600 user manual Modes

Job priority

Modes

The Queue Manager has the following modes:

■Anonymous user mode

■Repro operator mode

■Key operator mode

■System administrator mode

■Service operator

These different modes are designed to limit access to the specific functions to authorized users only.

The anonymous user mode only offers view access to the queue. In this mode the available buttons are disabled.

The repro operator, the key operator and the system administrator modes allow you to perform a number of activities on the jobs in the queue, with the help of the Abort, Delete, Resume and Hold buttons. The service operator mode is meant for Océ technicians.

Note: In the Queue Manager and the System Control Panel, the repro operator, the key operator and the system administrator have the same user rights. In the Settings Editor, however, the user modes offer different rights.

Access The access to the key operator, repro operator, system administrator modes and service operator is password protected to allow only authorized personnel to use particular functions. You can enter these modes by selecting the Login option from the File menu and by specifying the correct password when prompted for it (see ‘Log in’ on page 118).

From the ‘File’ menu, select ‘Close’ to exit the Queue Manager.

The priority of print and copy jobs in the Queue Manager is determined by the order in which they are submitted to the Océ TDS600. However, there is a setting in the Settings Editor which allows you to give copy jobs priority over print jobs.

Océ Power Logic: Queue Manager 127