OcéPower Logic: Settings Editor (forthe key operator) 163
Cut length method
Description The Océ TDS600determines the length and width of each
digitalimage. Use ‘Print cut method’,to select one of the fol-
lowingdefault cut methods:
StandardThe print length corresponds to a standard format,
dependingon the media width.
SynchroThe pr intlen gth is related to the length of the image.
This is the default value. The minimum print length is 279
mmor 11 inch.
CustomThe print length is definedby the user. The minimum
length is 279 mm or 11 inch. The default value is specified
with the Cut length option.
Min/maxvalues N/A
Menupath Jobs - Copy & File - Defaults - Print card - Sheet - Cut length
method
Custom cut length
Description Youcan define a specificcut length.
Thespecified cut length is used when t he Custom cut method
isselected. If custom cut is enabled, the copymedia length
willonly depend on this se tting,any o theri nfluence is exclud-
ed.
Min/maxvalues 279 - 15000 mm
Menupath Jobs - Copy & File - Defaults - Print card - Sheet - Custom cut
length
Add leading / trailing strip
Description Use the add leading /trai lingstrip settin gsto add, by default,
a blank strip at the top or bottom of the image. The p rint
length will increase accordingly.
‘Addleading strip’ wil lad d a blank strip at the top of the im-
age.
‘Addtrailing strip’ will add a blank strip at the bottom of the
image.
By default, no leading or trailing strip is defined.
Note: Adding a trailingstrip will only work if th e cut method
isset to synchro cut.
Min/maxvalues 0-400mm
Menupath Jobs - Copy & File - Defaults - Print card - Sheet- Strips - Add
leading / trailing strip