OcéPower Logic: Settings Editor (forthe key operator) 197
Timers

The Timersgroup allows you to adjust the following settings(see figure 114):

■Sleepmode timer
■Controller panel time out
[114]Timers settings forkey operators.
Sleepmode time
Description Use‘Sleep mode timer’, to specifyafter how many minutes of
inactivity the system should switch to Sleep mode. In Sleep
mode, almost all the power supplies are switched off. Note:
The sleep mode time-out also applies to the scanner and the
folder,but NOT to the controller.
Min/maxvalues N/A
Menupath System - Timers - Sleep mo de timer
Controller panel time out
Description Use ‘Paneltime-out’, to set the panel time-outof thescanner
panel. When no settings are being selected and no original is
being scanned,th e panel will switch to the default settings af-
ter this time out. By default this setting is ‘ON’. The default
panel time-out is 90 sec.
Min/maxvalues N/A
Menupath System - Timers - Controller panel time out - <value> - Apply