[5] Operator panel in off line mode

The focus is shifted to the Media option (indicated by the shadow effect).

2Use the Up/Down buttons to select the roll or sheet feeder for which you have just loaded new media.

3Press the right selection button to activate the Mat. (Material) option.

The dotted line around the current selection is changed into an uninterrupted line and the small selection triangles next to the specified material are no longer dimmed.

4Use the Up/Down buttons to select the material you just loaded.

5Press the on line button to put the printer on line again. The printer now knows which material is used for the specified roll or sheet feeder.

Set media type for manual feed

1Press the on line button on the printer operating panel to put the printer off line. The message ‘Off line’ is displayed in the status window.

2Press the left selection button to shift the focus to the Media option. A shadow effect is used to indicate that the focus is set to this option.

3Use the Up/Down buttons to select the Manual option.

4Press the right selection button to activate the Mat. (Material) option.

The dotted line around the current selection is changed into an uninterrupted line and the small selection triangles next to the specified material are no longer dimmed.

30

Océ TDS600 Multifunctional Digital System User Manual

Page 30
Image 30
Oce North America TDS600 user manual Set media type for manual feed