Oce North America TDS600 Paper jam in the roll feed section, Paper jam in the manual feed

Note: If the cut sheet feed covers are still flashing on the display, re-check the sheet feeder section.

Paper jam in the roll feed section

▼How to clear a jam in the roll compartments

1Open the appropriate roll compartment.

Note: Only one compartment can be open at a time.

2Remove any jammed printing material from the paper path (see figure 164) and, if necessary, pull back the paper and rewind it.

Note: Occasionally, a jam may occur before the printing material has been cut. In that case, you can cut the material manually by pressing the appropriate green load button in the roll compartment.

3Reload the roll if the system asks you to do so (see ‘Load rolls of copy material’ on page 241).

4Close the roll compartment again.

Note: If the roll feed covers are still flashing on the display, re-check the roll feed section.

Paper jam in the manual feed

▼		How to clear a jam in the manual feed
	1 Open the manual feed by tilting it towards you (see figure 165).

[165] Opening the manual feeder

2Remove any jammed printing material.

Problem solving 271