Oce North America TDS600 user manual Sections on the operator panel

Original section

The five function buttons (below the display) allow you to select functions or subfunctions within a card.

Finally, the arrow buttons can be used, like the numeric buttons, to define numeric settings. The arrow buttons are also used for selecting subfunctions.

Sections on the operator panel

The operator panel of the Océ TDS600 Copier consists of the following sections:

■Custom

■Original

■Print

■File

Custom section Upon start-up of the Océ TDS600 Copier, a number of default settings are available from the ‘Custom’ section. These settings, which can also be found in one of the other two sections, are the most commonly used options on the Océ TDS600 Copier. The key operator can change the contents of the ‘Custom’ section from the Océ Settings Editor on the controller (see ‘Custom card’ on page 153).

By default, the ‘Custom’ section includes the ‘Media’, ‘Input mode’ and ‘Zoom’ settings plus one or two others. This could be, depending on your configuration and language settings, the ‘Folding’ (if you have a folder), ‘Language’ (if you work with more than one language) or ‘Exposure’ settings. See figure 10 on page 41 for an example of the ‘Custom’ section.

The ‘Original’ section contains all original-related settings, divided over a number of cards. The following cards are available (top to bottom):

■Scanner

■Image

■Sheet

■Feeding

Each card contains a number of specific options, as is shown below.

Use the Océ TDS600 to copy 43