UsetheOcéTDS600tocopy 41
Scanner operator panel
The Océ TDS600 is a very user-friendly system. The sca nner,in pa rticular,i s
veryeasy to operate. Basic copy jobs can be performed by simply pressing the
green (start) button on the scanner operato r panel. Only if you want to perform
morecomplex copy jobs, you have to changethe default copy settings with the
help of the other settings on th e scanner operator panel.
The operatorpanel is located above the original feed. As youcan see in this
diagram (see figure 10), the panel co nsists of a display in the centre surrounded
by a number of function, section and arrow buttons. To the left of the display,
you can find the ‘Stop’ button and below the display you can find the ‘Start’,
‘Numeric’ and ‘Correction’ buttons a s well as the ‘Counter’ window.
This section consists of two parts. The first part explains the basi cu se of the
buttons. The second part deals with speci al use of the display. It describes how
to use the soft buttons above and along the sides of the display to define your
copy settings.
.
[10]Scanner operator panel
Stop
button
Correction buttonStart button
Sectionbuttons Arrowbuttons
Function
buttons
Numeric buttons