Oce North America TDS600 Paper jam at the integrated receiving tray

Problem solving 273
5Open the fuser section cover by lifting t he cover by the green handle (see
figure 167).
[167]Opening the fuser sectioncover
6Removeany jammed printing material from the fuser section.
Note: If the printingmaterial is visible for the manual feed section, remove
it fromthe front side of the Océ TDS600Printer.
7Pull the green knob to release the fuser section cover and close the cover with
the help of the green handle.
8Close the cover.
9Switch theprinter on again.
Paper jam at the integrated receiving tray
▼
▼▼
▼How to cleara jam at the integratedreceiving tray
1Open the manualfeeder to release the printing material.
Attention:I f you fail to do so, the OPC drum might get damaged when you
removejam med material.
2Open the cover on the left side (see figure 166 on page 272).
3Open the fuser section cover by lifting t he cover by the green handle (see
figure 167).
4Removea nyjammed printing material from the Integrated ReceivingTray.
5Pull the green knob to release the fuser section cover and close the cover with
the help of the green handle.