UsetheOcéTDS600tocopy 39
[8]On/off switch on the scanner
[9]On/off button on the Océ PowerLogic controller
▼
▼▼
▼Switch the Océ TDS600 printer on
1Setthe on/offswi tch at the rear of the printer to position ‘1’ , (see figure 7). The
greenLED will be on.
2The message ’Ready to print’ appears.
▼
▼▼
▼Switch the Océ TDS600 scann er on
1Set the on/off switch at the front of the scanner to position ‘1’ ., (see figure 8).
The green LED will be on.
2The message ’Ready to copy’ appears.
▼
▼▼
▼Switch the Océ Power Logic controller on
1Press the on/off button on the controller, (see figure 9).
2Pressthe on/off button on the monitor.