SMC Networks SMCWHSG14-G manual Email Server Redirect

Item	Default		Description
			There are three types of DHCP Services.
DHCP Server	Enable		DHCP Disable—Disable the DHCP server function.
			DHCP Relay—Enable DHCP Relay function.
			DHCP Server—Enable DHCP server function.
DHCP Relay	To route DHCP through an external server, the administrator needs to
	enable the DHCP relay and assign a valid DHCP server IP address.
DHCP Server IP Address	Empty		Enter the IP address of DHCP server.
DHCP Server	The Wireless Hotspot Gateway's DHCP server is turned on and running
	by default when you install it in your network.
DHCP Pool Starting	192.168.2.2	Enter the DHCP Pool Starting IP address.
Address
Pool Size	253		The DHCP pool size range is 1 to 512.
Lease Time	300		The DHCP lease time. The DHCP lease time range is 1 to
	Minutes		71582788 minutes.
Primary DNS Server	168.95.1.1		Enter the IP address of the network’s primary DNS server.
Secondary DNS Server	Empty		Enter the IP address of a second DNS server on the
			network.
Email Server Redirect	To prevent some subscriber’s original Email server may protect by
	firewall or NAT network. Wireless Hotspot Gateway provides an extra
	Email server parameter to forward the subscriber’s Email. The Wireless
	Hotspot Gateway not only forwards the subscribers’ E-mail via other
	E-mail server but also changes the SMTP header. The recipient of your
	E-mail sees the message as if you sent it from your local Internet
	Service Provide, not form the hotel or other place. Note: Before setting
	this sever, please make sure the e-mail sever relay function is opened.
	It must not exceed 50 characters.
IP Address or Domain	Empty		Enter the E-mail server IP address or domain name.
Name
SMTP Port	25		Enter the SMTP port number for mail server. The SMTP
			port allowed range is 25 or 2500 to 2599.

Click Apply button to save the new settings.

57

SMCWHSG14-G