SMC Networks SMCWHSG14-G Network Specification, Connectors, Encryption, External Antenna Type

1.RS-232:Reserve for manufacture use.

2.LAN (1-4):

The rear panel supports four auto-sensing RJ-45 ports and all ports can be auto-switched to MDI-II connections. The LAN ports used for linking hosts or other network devices. The individual port can be either connected to 100BaseTX networks or 10BaseT networks. When connecting to a 100BaseTX network, the ports operate at 100Mbps in half-duplex mode or 200Mbps in full-duplex mode. When connecting to a 10BaseT network, the ports operate at 10Mbps in half-duplex mode or 20Mbps in full-duplex mode.

3.WAN: One Ethernet port used for linking xDSL or Cable Modem.

4.Reset Button:

The Wireless Hotspot Gateway has a reset button at the rear panel of the device. Use this function to reset the system back to factory defaults.

5.Power Jack: Used to connect the external power supply with the Wireless Hotspot Gateway.

1-5 Technical Specifications

1-5-1 Hardware Specifications

Network Specification

IEE802.3 10BaseT Ethernet

IEE802.3u 100BaseTX Fast Ethernet

IEE802.11g Wireless LAN

IEEE802.3af Power over Ethernet

ANSI/IEEE 802.3 NWay auto-negotiation

Wi-Fi Compatible

Connectors

One Printer Port (1 DB9 DTE male connector for Account Generator Printer)

Four LAN Ports (10BaseT/100BaseTX Auto cross-over)

One WAN Port (10BaseT/100BaseTX Auto cross-over)

Encryption

WEP (Wired Equivalent Privacy) 64/128-bit RC4

WPA (Wi-Fi Protected Access)

External Antenna Type

2dBi (Max) Dual detachable diversity antenna with reverse SMA

12

SMCWHSG14-G