2. Installation

The followings are instructions for setting up the Wireless Hotspot Gateway. Refer to the illustration and follow the simple steps below to quickly install your Wireless Hotspot Gateway.

2-1 Wall-Mounting

The Wireless Hotspot Gateway can be wall-mounted on a wall by applying the two mounting brackets on screws.

Figure 2-1 Wall-Mounting Bracket - Bottom of Wireless Hotspot Gateway

Please refer to the following instructions for mounting a Wireless Hotspot Gateway on a wall or other surface.

1.Install two screws on a wall according to the relative positions shown below.

Figure 2-2

2.Hang Wireless Hotspot Gateway on the wall by sliding the two screws in the mounting brackets.

2-1.1 Bracket-Mounting

1. Attach the brackets to the device using the screws provided in the mounting kits.

16

SMCWHSG14-G

Page 17
Image 17
SMC Networks SMCWHSG14-G manual Wall-Mounting, Bracket-Mounting