GB
42
Important Information
How to measure correctly?
The measurement process
should be performed unclo-
thed, if possible, and bare-
foot. It is recommended to
perform the measurements
under similar conditions and
at the same time of day
(e.g. in the morning, sober).
How often should measure-
ments be performed with
Soehnle body analysis scales?
Actually, that is up to you.
However, we recommend
always measuring at the same
time under the same condi-
tions, once a day. The daily
routine, eating and drinking
habits, but also your lifestyle,
influence the water content of
your body. When using body
analysis scales, this can affect
deviations in the display. The
scale stores the median value.
Is it possible to recognize a
change in the percentage of
body mass contents on the
first day?
It is possible for the body ana-
lysis scale to display deviating
values. This is caused by the
changing water content of
your body throughout the day
and the fact that your body's
own values change depending
on stress.
Will stored trend curves be
lost if the data of one memory
slot is changed?
No. Only, if the data is
deleted.
Can external influences
impact the measurement
values?
Extreme electromagnetic
influences, e.g. operating a
radio transmitter in the imme-
diate proximity of the device,
can influence the measure-
ment results.
After removal of the influence,
the product will be fully
functional again.
However, it might be necessa-
ry to switch the device off and
back on.
How are trend curves created?
Daily trend curve (day) means:
The daily median values of
the last 60 days will be
displayed. The last value will
always be added to the right
side.
Weekly curves (week) means:
A weekly median value will be
determined based on 7 daily
median values. Therefore, the
first weekly median value can
be displayed only after one
week*.
The last 60 weekly median
values will be displayed.
Monthly curve (monthly)
means:
A monthly median value will
be determined based on 30
daily median values.
Therefore, the first monthly
median value can be display-
ed only after one month*. Up
to 60 monthly median values
can be displayed.
* We therefore recommend to
select a daily trend initially.
BA63730_FT4_GB.qxd 12.09.2007 9:16 Uhr Seite 42