To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where frequency allocation system is 9 kHz/step, change the tuning interval.
Press the POWER button while pressing the TUNER/BAND button. To reset the interval, repeat this procedure.
NOTE
When the AM tuning interval is changed, all preset stations (see "PRESETTING STATIONS")are cleared. The preset stations have to be set again.
|
|
|
|
| CD PLAYING | pg. 9 |
|
|
|
|
|
BASIC OPERATIONS
LOADING DISCS
Press the CD button, then press the 
OPEN/CLOSE button to open the disc compartment. Load disc (s) with the label side up.
To play one or two discs, place the discs on the tray 1 and 2.
To play three discs, press the DISC CHANGE button to rotate the trays after placing two disc. Place the third disc
on tray 3. Close the disc compartment by pressing the 
OPEN/CLOSE button.
