The unit can store a total of 32 preset stations. (Each band has a maximum of 20 available preset stations.) When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band, and press the 
DOWN or 
UP button select a station.
2 Press the 
SET button to store the station.
A station is assigned a preset number, beginning from 1 in consecutive order for each band.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations for all the bands or a total of 20 preset stations for one band have already been stored.
|
|
|
|
| RADIO RECEPTION (cont.) | pg. 8 |
|
|
|
|
|
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press the TUNER/BAND button to select a band.
2 Press the numbered buttons to select a preset number.
Example:
To select preset number 20, press the +10, +10 and 0 buttons.
To select preset number 15, press the +10 and 5 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press the 
DIRECTION/PRESET button repeatedly. Each time the button is pressed, the next ascending number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press the 
CLEAR button, and press the 
SET button within 4 seconds.
The preset numbers of all other stations in the band with higher numbers are also decreased by one.
