Load discs.
To play all discs in the disc compartment, press the 
button.
Play begins with the disc on tray 1.
To play one disc only, press one of the DISC DIRECT PLAY buttons.
The selected disc is played once.
To stop play, press the 
button.
To pause play, press the 
button. To resume play, press again.
To search for a particular point during playback, keep the 
or 
button pressed and release the button at the desired point.
To skip to the beginning of a track during playback, press the 
or 
button repeatedly.
To remove discs, press the 
OPEN/CLOSE button.
To start play when the power is off (Direct Play Function)
Press the CD button. The power turns on and play of the loaded disc begins.
When the 
OPEN/CLOSE button is pressed, the power is also turned on.
To check the remaining time
During play, press the CD EDIT CHECK button on the main unit or the EDIT/CHECK button on the remote control while pressing the SHIFT button. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above again.
Selecting a track with the remote control
1 Press one of the DISC DIRECT PLAY buttons to select a disc.
2 Press the numbered buttons and the +10 button to select a track. Example:
To select the 25th tack, press the +10, +10 and 5 buttons. To select the 10th track, press the +10 and 0 buttons.
The selected track starts to play and play continues to the end of that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without interrupting play. 1 Press the DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the 
OPEN/CLOSE button to close the disc compartment.
NOTE
•When loading an
•Do not place more than one compact disc on one disc tray.
•Do not tilt the unit wi th discs loaded. Doing so may cause malfunctions.
|
|
|
CD PLAYING (cont.) | pg. 10 |
|
|
|
|
