POSITIONING THE SPEAKERS NSX-A54only | Sony CX-NA50 specification

•Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or the speaker cords, since noise will be picked up.

•Do not unwind the AM antenna wire.

POSITIONING THE SPEAKERS (NSX-A54 only)

Position the speakers to make the most of the SURROUND effect.

Standard Positioning

cdFront speaker (Right)

eFront speaker (Left)

Surround speakers

Place the surround speakers behind the listening area.

To mount the surround speakers on the wall

Mount each speaker on a spot that can hold its weight.

NOTE

Sound is not heard from the surround speakers when the SURROUND is set off.

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is recommended.

Connect the outdoor antenna to the FM 75 Ω terminals.

Page 7

Image 7

Sony CX-NA50 user service POSITIONING THE SPEAKERS NSX-A54only, Standard Positioning cdFront speaker Right

Contents

COMPACT DISC STEREO SYSTEM Englishaiwa1 CX-NA50 For NSX-A54and NSX-A50 3 AC power cord PRECAUTIONSInstallation Electric Power Damage requiring Service PRECAUTIONS contTABLE OF CONTENTS Maintenance CONNECTIONSpg Check your system and accessories PREPARATIONS cont.pg Before connecting the AC cord AM loop antenna 3 Connect the supplied antennas4 Connect the AC cord to an AC outlet To position the antennas FM feeder antenna eFront speaker Left Surround speakers CONNECTING AN OUTDOOR ANTENNAPOSITIONING THE SPEAKERS NSX-A54only Standard Positioning cdFront speaker Right The /PRESET button on the remote control REMOTE CONTROLWhen to replace the batteries To use the SHIFT button on the remote control BEFORE OPERATION AUDIO ADJUSTMENTSTo cancel DEMO mode SOUND Press the BBE button VOLUMEGRAPHIC EQUALIZER BBE SYSTEM Using the headphones MANUAL TUNINGPress the GEQ buttons To cancel the selected mode To select with the remote control 2 Press the DOWN or UP button to select a station PRESETTING STATIONSTo select a band with the remote control When an FM stereo broadcast contains noise RADIO RECEPTION cont PRESET NUMBER TUNINGSelecting a preset number on the main unit To clear a preset station LOADING DISCS To change the AM tuning intervalCD PLAYING BASIC OPERATIONS Replacing discs during play Selecting a track with the remote controlCD PLAYING cont To check the remaining time REPEAT play RANDOM/REPEAT PLAYPROGRAMMED PLAY RANDOM play To check the program TAPE PLAYBACK4 Repeat steps 2 and 3 to program other tracks 5 Press the button to start play button to start play When tapes are loaded in both decksMUSIC SENSOR 2 Press the 3 Press the REV MODE button to select TAPE PLAYBACK contCONTINUOUS PLAY 1 Insert tapes into deck 1 and deck 1 Insert the tape to be recorded on into deck RECORDINGBASIC RECORDING Preparation To stop recording, press the button RECORDING contINSERTING BLANK SPACES DUBBING A TAPE MANUALLY To stop dubbing DUBBING THE WHOLE TAPE1 Press the TAPE button 3 Press the TAPE/DECK 1/2 button to select deck 1 Insert the tape into deck AI EDIT RECORDINGRECORDING cont Time on cassette tapes and editing time PROGRAMMED EDIT RECORDINGTo stop the recording To clear the edit program to designate the tape length 2 Press the CD button and load the discs3 Press the CD EDIT/CHECK button twice 4 Press the To change the program of each side KARAOKEMICROPHONE MIXING To stop recording Recommended microphones When not using the microphonesVOCAL FADER/MULTIPLEX FUNCTIONS 1 Connect your microphone to the MIC jack KARAOKE cont gCancelKARAOKE PROGRAM 3 Repeat steps 2 to reserve other tracks CLOCK AND TIMERSETTING THE CLOCK 3 seconds to select a disc To display the current time SETTING THE TIMERTo switch to the 24-hourstandard DOWN or 5 Prepare the source CLOCK AND TIMER contPreparation Using the unit while the timer is set TIMER RECORDINGSETTING THE SLEEP TIMER To cancel timer standby mode temporarily OTHER CONNECTIONSpg CONNECTING OPTIONAL EQUIPMENTTo cancel the sleep timer When connecting a turntable SUPER WOOFER JACK To adjust the sound level of the external sourceGENERALpg LISTENING TO EXTERNAL SOURCES To demagnetize the heads CARE AND MAINTENANCETo clean the cabinet To clean the heads and tape paths Sound is emitted from one speaker only TROUBLESHOOTING GUIDETo reset GENERAL There is no sound Signal-to-noiseratio SPECIFICATIONSTuning range Power output Weight of main unit Power requirementsPower consumption Dimensions of the main unit Endnotes 1 Popup - Popup Warranty 1 year parts/laborProblems/Notes Volume Setting Flashes

Sony CX-NA50 POSITIONING THE SPEAKERS NSX-A54only, Standard Positioning cdFront speaker Right

Models: CX-NA50

POSITIONING THE SPEAKERS (NSX-A54 only)

Standard Positioning

eFront speaker (Left)

To mount the surround speakers on the wall

CONNECTING AN OUTDOOR ANTENNA