Sony DCR-VX2000 operating instructions 104, Labeling a cassette, To change the label you have made

Labeling a cassette

To change the label you have made

Insert the cassette to change the label, and operate in the same way as you do to make a new label.

If you set the write-protect tab of the tape to lock

You cannot label the tape. Slide the write-protect tab to release the write protection.

If you have superimposed titles in the cassette

When the label is displayed, up to four titles also appear.

When the “-----” indicator has fewer than 10 spaces

The cassette memory is full.

The “-----” indicates the number of characters you can select for the label.

To erase a character

Turn the SEL/PUSH EXEC dial to select [ C ], then press the dial. The last character is erased.

To enter a space

Select [ ], then select the blank part.

104