Playing back a tape

Various playback modes

To operate video control buttons, set the POWER switch to VCR.

To view a still picture (playback pause)

Press X during playback. To resume normal playback, press N or X.

To advance the tape

Press M in stop mode. To resume normal playback, press N.

To rewind the tape

Press m in stop mode. To resume normal playback, press N.

To change the playback direction

Presson the Remote Commander during playback to reverse the playback direction. To resume normal playback, press N.

To locate a scene monitoring the picture (picture search)

Keep pressing m or M during playback. To resume normal playback, release the button.

To monitor the picture at high-speed while advancing or rewinding the tape (skip scan)

Keep pressing m while rewinding or M while advancing the tape. To resume rewinding or advancing, release the button.

Playback – Basics

To view the picture at slow speed (slow playback)

Press y during playback. For slow playback in the reverse direction, presson the Remote Commander, then press y. To resume normal playback, press N.

To view the picture at double speed

Press ⋅ 2 on the Remote Commander during playback. For double speed playback in the reverse direction, press , then press ⋅ 2 on the Remote Commander. To resume normal playback, press N.

To view the picture frame-by-frame

Press C on the Remote Commander in playback pause mode. For frame-by-frame playback in the reverse direction, press c. To resume normal playback, press N.

To search the last scene recorded (END SEARCH)

Press END SEARCH in stop mode. The last five seconds of the recorded portion plays back and stops.

In various playback modes

•Sound is muted.

•The previous picture may remain as a mosaic image during playback.

When the playback pause mode lasts for five minutes

Your camcorder automatically enters the stop mode. To resume playback, press N.

Slow playback

Slow playback can be performed smoothly on your camcorder, however, this function does not work for a signal output through the DV IN/OUT jack.

When you play back a tape in reverse

Horizontal noise may appear at the center, or the top and bottom of the screen. This is not a malfunction.

If you insert the mini DV cassette recorded in a PAL system

The camcorder automatically identify the system, and playback starts. You can only

view the picture on your camcorder. (Quasi PAL playback)

29

Page 28
Image 28
Sony DCR-VX2000 operating instructions Playing back a tape Various playback modes