Adjusting the white balance

White balance adjustment makes white subjects look white and allows more natural color balance for camera recording. Normally, white balance is automatically adjusted. You can obtain better results by adjusting the white balance manually when lighting conditions change quickly or when recording outdoors: e.g., neon signs, fireworks.

(1) Set the AUTO LOCK selector to the center (auto lock release) position while the camcorder is in standby, recording, or memory mode.

(2) Press WHT BAL. The white balance indicator appears on the LCD screen or in the viewfinder.

(3) Turn the SEL/PUSH EXEC dial to select the appropriate white balance mode under the following conditions. As you turn the dial, the display changes as follows:

(One-push white balance) y(Outdoor) y n (Indoor)

1

AUTO

2

 

LOCK

WHT BAL

 

HOLD

3

 

 

 

 

Advanced Recording Operations

Indicator

Shooting conditions

• Adjusting the white balance according to the light source. This operation is not available during recording. Follow the procedure described on the next page to adjust the setting again.

(Outdoor)• Recording a sunset/sunrise, just after sunset, just before sunrise, neon signs, or fireworks

• Under a color matching fluorescent lamp

n (Indoor) • Lighting condition changes quickly

Too bright a place such as a photography studio

Under sodium lamps or mercury lamps

49

Page 48
Image 48
Sony DCR-VX2000 operating instructions Adjusting the white balance, Indicator Shooting conditions