Sony DCR-VX2000 Erasing the last program, Erasing all programs, On a blank portion of the tape

Dubbing only desired scenes – Digital program editing

(6) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.

The CUT-IN point of the first program is set, and the top part of the program mark changes to light blue.

(7) Search for the end of the first scene you want to insert using the video operating buttons, then pause playback (p. 29).

(8) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.

The CUT-OUT point of the first program is set, then the bottom part of the program mark changes to light blue.

(9) Repeat steps 5 to 8, then set the program.

When the program is set, the program mark changes to light blue. You can set a maximum of 20 programs.

7

STOP REW PLAY FF PAUSE

6	V I DEO ED I T			0:08:55:06
	MARK		1	OUT
	UNDO
	ERASE	ALL
	START
	TOTAL		0:00:00:00
	SCENE		0
	[MENU] : END

8,9

V I DEO ED I T			0:09:07:06
MARK		2	I N
UNDO
ERASE	ALL
START
TOTAL		0:00:12:13
SCENE		1
[MENU] : END

V I DEO ED I T			0:10:01:23
MARK		4	I N
UNDO
ERASE	ALL
START
TOTAL		0:00:47:12
SCENE		3
[MENU] : END

On a blank portion of the tape

You cannot set CUT-IN or CUT-OUT on a blank portion of the tape.

Note

The total time of the programs is indicated on the LCD screen or in the viewfinder, however, if the time code on the tape is not continuous, the time may not be indicated properly.

Erasing the last program

To change the end of the last program, delete the CUT-OUT mark.

To erase the whole program, delete both the CUT-IN and CUT-OUT marks.

(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. The last set program mark flashes.

(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the setting is canceled.

	To cancel erasing
	Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
	Erasing all programs
	(1) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select
	ERASE ALL, then press the dial. All the program marks flash.
84	(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
	settings are canceled.