Settings Menu 4 Chapter

 

AUDIO CONTROL [Audio]: Settings related to audio

 

Description of settings

 

 

 

 

 

 

 

 

 

 

control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT ARRANGE [> Input arng]: Make settings for input

 

Set the channels on which to record the input audio signals as

 

audio mixing.

 

 

follows.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) Use the fFgG buttons to move the cursor and the SET

 

Note

 

 

 

 

(YES) button to toggle the setting on and off.

 

When, in 4-channel mode, analog audio is selected for all four

 

(2) To save the settings, press the MENU button to return to

 

channels (channels 1/2 and 3/4), the same analog audio

 

the previous screen, then press the SET (YES) button.

 

signals are recorded on channels 1 and 3 and on channels 2

 

Example settings:

 

 

 

 

 

 

 

 

 

 

and 4, respectively. That is, the analog signal recorded on

 

 

 

 

 

 

 

 

 

 

 

channel 1 is also recorded on channel 3 and the analog signal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recorded on channel 2 is also recorded on channel 4.

 

 

 

AUDIO INPUT SOURCE

 

 

 

 

 

You can adjust the audio level on each of the four channels

 

 

 

 

ARRANGE

 

 

 

 

 

 

1

 

separately using the REC/PB LEVEL control knobs with the

 

 

 

in1 in2 in3 in4

 

 

 

 

 

VAR switch set to REC.

 

 

 

 

ch1:*on

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

ch2:

on

on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ch3:

 

 

on

 

 

 

 

 

 

 

 

 

 

 

 

ch4

on

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

ON/OFF :

SET KEY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO MENU : MENU KEY

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A Input audio channel 1 (“in1”) is recorded on audio channel 1

 

 

 

 

 

 

(“ch1”) on tape.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B Input audio channels 2 and 4 (“in2” and “in4”) are recorded

 

 

 

 

 

 

mixed on audio channel 2 (“ch2”) on tape.

 

 

 

 

 

 

 

C Input audio channel 4 (“in4”) is recorded on audio channel 3

 

 

 

 

 

 

(“ch3”) on tape.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D Input audio channel 3 (“in3”) is recorded on audio channel 4

 

 

 

 

 

 

(“ch4”) on tape.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LEVEL SELECT [> Level Sel]

REF LEVEL [>> REF

 

*–20 dB [>>> –20dB](factory default setting for DSR-1500A)

 

 

 

 

Level]: Select the

 

*–18 dB [>>> –18dB](factory default setting for DSR-

 

 

 

 

audio reference level

 

1500AP)

 

 

 

 

 

 

 

 

 

 

 

 

 

(headroom) for

 

–16 dB [>>> –16dB]

 

 

 

 

 

 

 

 

 

 

 

 

 

recording on tape.

 

–12 dB [>>>–12dB]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This setting is valid in DVCAM format only. When the

 

 

 

 

 

 

recording format is DV (SP), the reference level is fixed at − 12

 

 

 

 

 

 

dB.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1 IN LEVEL [>> CH1

 

*+4 dBm [>>> +4dBm]

 

 

 

 

 

 

 

 

 

 

 

 

 

input]: Select the

 

0 dBm [>>> 0dBm]

 

 

 

 

 

 

 

 

 

 

 

 

 

audio level setting

 

–3 dBm [>>> –3dBm](for DSR-1500AP only)

 

 

 

 

according to the audio

 

–6 dBm [>>> –6dBm]

 

 

 

 

 

 

 

 

 

 

 

 

 

level of the signal input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the AUDIO IN 1/3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH2 IN LEVEL [>> CH2

 

*+4 dBm [>>> +4dBm]

 

 

 

 

 

 

 

 

 

 

 

 

 

input]: Select the

 

0 dBm [>>> 0dBm]

 

 

 

 

 

 

 

 

 

 

 

 

 

audio level setting

 

–3 dBm [>>> –3dBm](for DSR-1500AP only)

 

 

 

 

according to the audio

 

–6 dBm [>>> –6dBm]

 

 

 

 

 

 

 

 

 

 

 

 

 

level of the signal input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the AUDIO IN 2/4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUT LEVEL [>> Out

 

*+4 dB [>>> +4dB]

 

 

 

 

 

 

 

 

 

 

 

 

 

Level]: Select the

 

0 dB [>>> 0dB]

 

 

 

 

 

 

 

 

 

 

 

 

 

analog audio output

 

–3 dB [>>> –3dB](for DSR-1500AP only)

 

 

 

 

 

reference level.

 

–6 dB [>>> –6dB]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INT AUDIO SG [> Audio SG]: Select the operation of the

 

SILENCE [>> silence]: Silent signal

 

 

internal audio test signal generator.

 

*1kHz SINE [>> 1kHz]: 1-kHz, − 20 dB FS (for DSR-1500A) or

 

 

 

 

 

 

− 18 dB FS (for DSR-1500AP) sine wave signal

 

 

 

 

 

 

When you select SG (audio test signal) as the audio input in

 

 

 

 

 

 

the video/audio input setting section on the front panel, the

 

 

 

 

 

 

audio test signal generated by the internal audio test signal

 

 

 

 

 

 

generator is input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

74 Menu Contents