Playback and Recording 2 Chapter
To perform the following operations
Operation | Do this: |
Stop playback. | Press the STOP button. |
| The unit enters stop mode, and will automatically |
| switch to standby off mode after the time set with the |
| STOP TIMER menu item (see page 71) for tape |
| protection. |
Adjust the audio playback |
| For digital (optional | |
level. |
| analog audio output | |
|
| Set the VAR switch on the front panel to PB and use | |
|
| the REC/PB LEVEL control knob for each channel. | |
|
|
| |
|
| For outputs from the PHONES connector and | |
|
| MONITOR connector | |
|
| Use the PHONES control knob on the front panel | |
|
| (outputs from the PHONES connector on the front | |
|
| panel and the MONITOR connector on the rear panel | |
|
| are adjusted). | |
|
|
| |
Play back in shuttle mode |
| To carry out a | |
while monitoring the |
| speed) in forward or reverse direction, press the G or | |
video.a) |
| g button. | |
|
| To return to | |
|
| button. | |
|
|
| |
|
| Note |
|
|
| When performing these operations, set the LOCAL/ | |
|
| REMOTE switch on the front panel to LOCAL. | |
|
|
| |
Play back in jog mode while |
| To carry out | |
monitoring the video.a) |
| reverse direction, press the f or F button. | |
|
| When you hold down the f or F button, playback is | |
|
| continued in jog mode (− 1/ times normal speed) in | |
| 2 | ||
|
| forward or reverse direction. | |
|
|
| |
|
| Note |
|
|
| When performing these operations, set the LOCAL/ | |
|
| REMOTE switch on the front panel to LOCAL. | |
|
|
| |
Inhibit the unit from |
| Set the CHARA. DISPLAY menu item (see page 68) | |
outputting text information |
| to OFF. | |
(time data, operation mode |
|
|
|
indications, etc.) to the |
|
|
|
video monitor. |
|
|
|
|
| ||
Remove the cassette. | Press the EJECT button. | ||
|
| If a CNT value is shown in the time counter display, | |
|
| the CNT value is reset. | |
|
|
| |
Disable the automatic |
| Set the AUTO REW menu item (see page 68) to | |
rewind function. |
| DISABLE. | |
|
|
| |
Change the time period |
| Change the setting of the STOP TIMER menu item | |
before the unit switches |
| ||
from stop mode to standby |
|
|
|
off mode. |
|
|
|
a) When the SEARCH ENABLE menu item (see page 67) is set to ENABLE.
42 Playback