CDigital signal input/output section (optional DSBK-1501 Digital Input/Output Board)

The connectors in this section are available when the optional DSBK-1501 board is installed.

aSDI/SDTI (QSDI) IN connector

bSDI/SDTI (QSDI) OUT1/OUT2 connectors

c AUDIO (AES/EBU) IN 1/2 and AUDIO (AES/EBU) IN 3/4 connectors

d AUDIO (AES/EBU) OUT 1/2 and AUDIO (AES/EBU) OUT 3/4 connectors

IN

OUT1

OUT2 SDI/SDTI

IN

AUDIO I/O (AES/EBU)

OUT

 

 

(QSDI)

 

 

 

 

 

 

1/2

 

3/4

1/2

3/4

Overview 1 Chapter

aSDI/SDTI (QSDI) IN (Serial Digital Interface/ Serial Data Transport Interface (QSDI) input)

connector (BNC type)

This connector inputs digital video and audio signals in SDTI (QSDI) or SDI format. To select the required input signal formats, use the SDTI/i.LINK button or VIDEO button on the front panel. The current input signal selections are indicated in the INPUT signal display section on the front panel.

bSDI/SDTI (QSDI) OUT1/OUT2 (Serial Digital Interface/Serial Data Transport Interface (QSDI)

output 1/output 2) connectors (BNC type)

These connectors output digital video and audio signals in SDTI (QSDI) or SDI format. To select these output signal formats, use the DIGITAL OUTPUT menu item (see page 75). The current output signal selections are indicated in the OUTPUT signal display section on the front panel.

Note

When searching at speeds in the range +1/2 to +1/30 or

−1/2 to − 1/30 times normal speed, the audio signal output from these connectors in SDTI (QSDI) format and monitored on external equipment may sound differently from the audio signal played back on this unit.

cAUDIO (AES/EBU) IN 1/2 and AUDIO (AES/ EBU) IN 3/4 connectors (BNC type)

Input digital audio signals in AES/EBU format to these connectors.

The left connector (1/2) is for audio channels 1 and 2, and the right connector (3/4) is for audio channels 3 and 4.

dAUDIO (AES/EBU) OUT 1/2 and AUDIO (AES/ EBU) OUT 3/4 connectors (BNC type)

These connectors output digital audio signals in AES/EBU format.

The left connector (1/2) is for audio channels 1 and 2, and the right connector (3/4) is for audio channels 3 and 4.

DTime code input/output section

aTC IN connector

b TC OUT connector

TC IN

OUT

aTC IN (time code input) connector (BNC type) Input externally generated SMPTE time code (for DSR- 1500A) or EBU time code (for DSR-1500AP) to this connector.

bTC OUT (time code output) connector (BNC type) This connector outputs a time code according to the operating state of the unit, as follows:

During playback: the playback time code

During recording: the time code generated by the internal time code generator or the time code input to the TC IN connector. When the EE OUT PHASE menu item (see page 71) is set to MUTE, no time code is output.

Location and Function of Parts

27