Sony DSR-1500A Connections for a Cut Editing System

Connections for a Cut Editing System

The following figure shows a cut editing system configuration that includes two DSR-1500A/1500AP units to serve as the player and recorder.

For details of connecting devices other than the DSR- 1500A/1500AP, refer to the instruction manual for each device.

Notes

•This application requires both of the DSR-1500A/ 1500AP units (recorder and player) to be fitted with the optional DSBK-1501 board.

•The DSR-1500A/1500AP units shown in the following figure are fitted with the optional DSBK-1501 and DSBK-1504/1504P boards.

When you select assemble or insert editing mode on the editing	A 75 Ω coaxial cable (not supplied)
control unit, the two DSR-1500A/1500AP units (recorder and	B 9-pin remote control cable
player) will automatically enter the selected editing mode.
	(not supplied)
	C Cable with RCA phono plugs
	(not supplied)

Composite		Composite
video input	Audio input	video input	Audio input
	Source monitor		Main monitor
1 VIDEO	3	1 VIDEO	3
OUT B-Y/CPST		OUT B-Y/CPST
(SUPER)	MONITOR	(SUPER)	MONITOR

SDI/SDTI		SDI/SDTI
(QSDI)	1	(QSDI)
OUT		IN
	1	VIDEO OUT
		Y/CPST

DSR-1500A/1500AP REMOTE		REF.	REMOTE	DSR-1500A/1500AP
		VIDEO IN
(player)	2		2	(recorder)

PLAYER RECORDER

Editing control unit (RM-450/450CE,

PVE-500, etc.) a)

a) For the settings on the editing control unit, see “Settings on an editing control unit” on page 97.

Settings and Connections 5 Chapter

Connections for a Cut Editing System 89