Playback Procedure
1
LOCAL/
REMOTE switch
dB | dB | INPUT | VIDEO | AUDIO | SERVO |
| CL REC INHI |
| ||
0 | 0 | V:SDTI |
|
| ||||||
|
| COMPOSITE | TC | COUNTER |
| NO EDIT | REPEAT | |||
SDTI | S VIDEO | ANALOG | ANALOG |
|
|
|
|
| ||
i.LINK | AES/EBU | AES/EBU |
|
|
|
|
| |||
| SDI SG | SDI SG | SDI SG |
|
|
|
|
| ||
OUTPUT | AUDIO |
|
|
|
|
| ||||
| VIDEO | HOURS | MINUTES | SECONDS | FRAMES | |||||
SDI | COMPOSITE | CH 1/2 | ||||||||
SDTI | S VIDEO | CH 3/4 | PB FS | REC MODE | VITC | REMOTE | ||||
CH- 1 3 | CH- 2 | 4 |
|
| 48K 44.1K 32K | 2CH 4CH | EDIT MODE | 9P i.LINK |
REW | PLAY | F FWD | STOP | REC |
2
Note
When controlling this unit from an editing control unit connected to the REMOTE connector of this unit, set the LOCAL/REMOTE switch of this unit to REMOTE, turning the REMOTE indicator on. When not, set the switch to LOCAL, turning the indicator off.
1 Insert a cassette.
For details of cassette insertion see page 31, and for usable cassette types see page 29.
The cassette is automatically drawn into the unit and the STOP button lights. A few seconds later, if the STOP menu item under the AUTO EE SELECT menu item (see page 67) is set to PB, a still image will appear on the monitor screen.
2 Press the PLAY button.
This starts the playback operation. When the tape is played back all the way to the end, the unit automatically rewinds it and then stops.
If the following indicators light when a cassette is loaded
Indicator | It means: |
|
|
Cassette memory indicator | The loaded cassette contains a cassette memory. |
|
|
CL indicator | There is ClipLink log data stored in the cassette |
| memory on the loaded cassette. |
|
|
NO EDIT indicator | • The tape was recorded in the DV format, or a |
| DVCPRO tape is inserted. |
| You cannot use it as a recording tape for editing. |
| • The recording format selected on this unit is DV |
| (SP). |
|
|
Playback and Recording 2 Chapter
Playback 41