Video performance

Band width

Composite/S-video (DSR-1500A):

 

30 Hz to 4.2 MHz ±1.0 dB (Y)

 

Composite/S-video (DSR-1500AP):

 

25 Hz to 4.8 MHz ±1.0 dB (Y)

 

Component (DSR-1500A):

 

30 Hz to 5.0 MHz ±1.0 dB (Y),

 

30 Hz to 1.5 MHz +1.0/− 5.0 dB (R− Y/

 

B− Y)

 

Component (DSR-1500AP):

 

25 Hz to 5.0 MHz ±1.0 dB (Y),

 

25 Hz to 2.0 MHz +1.0/− 2.0 dB (R− Y/

 

B− Y)

S/N

Composite/S-video I/O (Y):

 

52 dB or more

 

Component I/O (Y): 55 dB or more

Y/C delay

30 ns or less

K-factor

2.0% or less (K2T, KPB)

Processor adjustment range

Video level*

±3 dB/ −∞

to 3 dB selectable

Chrome level*

±3 dB/ −∞

to 3 dB selectable

Setup/Black level*

 

 

±30 IRE (±210 mV)

Chroma phase* ±30 °

 

System phase** Sync: ±1 ∝ s

SC: ±180 °

*Adjust with menu settings.

**Adjust with controls on the front panel.

Audio performance

Frequency response

Two-channel (48 kHz) mode: 20 Hz to 20 kHz ±1.0 dB Four-channel (32 kHz) mode:

20 Hz to 14.5 kHz ±1.0 dB

Dynamic range More than 87 dB Distortion (THD + N)

Less than 0.07% (48 kHz)

Input connectors

Digital signal inputs

SDI/SDTI (QSDI) IN (optional DSBK-1501 Digital Input/ Output Board required)

BNC type

SDTI (QSDI) format (270 Mbps)

SDI format (270 Mbps), SMPTE 259M/ CCIR656-III

AUDIO (AES/EBU) IN (optional DSBK-1501 Digital Input/Output Board required)

BNC type (× 2), complying with AES- 3id-1995

i.DV IN/OUT

6-pin IEEE 1394 connector

Analog video inputs

REF. VIDEO IN

BNC type (× 2, loop-through with 75 Ω automatic terminator)

Black burst

0.286 V (DSR-1500A) or 0.3 V (DSR- 1500AP), 75 Ω , negative sync

Composite sync

VIDEO IN (optional DSBK-1504/1504P Analog Input Board required)

BNC type (× 3 and 1 loop-through connector with 75 Ω automatic terminator), composite/component/S- video switchable

Composite

Y/CPST and 1 loop-through connector with 75 Ω automatic terminator: 1.0 Vp-p, 75 Ω , sync negative

Component

Y/CPST: 1.0 Vp-p, 75 Ω , negative sync

R− Y/C and B− Y: 0.7 Vp-p (75% color bars for DSR-1500A or 100% color bars for DSR-1500AP), 75 Ω

S-video

Y/CPST: 1.0 Vp-p, 75 Ω , negative sync

R− Y/C: 0.286 Vp-p (DSR-1500A) or 0.3 Vp-p (DSR-1500AP), 75 Ω (burst level)

Analog audio inputs

AUDIO IN (optional DSBK-1504/1504P Analog Input Board required)

XLR 3-pin, female (× 2), +4/0/− 3*/− 6

dBm, high impedance, balanced

* For DSR-1500AP only

Time code input

TC IN

BNC type, SMPTE time code (DSR- 1500A) or EBU time code (DSR- 1500AP), 0.5 Vp-p to 18 Vp-p, 3.3 kΩ , unbalanced

Appendixes

Specifications 113