Settings Menu 4 Chapter

VIDEO CONTROL [Video]: Settings related to video control

Description of settings

 

 

INT VIDEO SG [> Video SG]: Select the test signal to be

(For DSR-1500A)

output from the internal test signal generator. When SG is

*75% COLOR BARS [>> 75% bars]: 75% color bar signal

selected using the VIDEO button in the video/audio input

BLACK BURST [>> BB]: Black burst signal

setting section, the internal test signal generator outputs

 

(For DSR-1500AP)

the selected test signal. This signal can be recorded.

*100% COLOR BARS [>> 100% bars]: 100% color bar signal

 

 

75% COLOR BARS [>> 75% bars]: 75% color bar signal

 

BLACK BURST [>> BB]: Black burst signal

 

 

STD/NON-STD [> STD/N-STD]: Select the STD or NON-STD

*FORCED STD [>> STD]: The STD mode is always used

mode in accordance with the composite video or S-video

(forced STD mode).

input.

FORCED NON-STD [>> NON-STD]: Use this setting when

 

the input video signal is unstable (forced NON-STD

 

mode).

 

 

OUT REF SEL [> Out Ref]: Select the reference video signal

*REF VIDEO [>> REF]: Use the signal input to a REF. VIDEO

to use.

IN connector as the reference video signal. The input

 

video signal to be edited is required to be in

 

synchronization with the reference video signal.

 

INPUT VIDEO [>> INPUT]: Use the input video signal

 

selected with the VIDEO button in the video/audio input

 

setting section.

 

 

(For DSR-1500A only)

*OFF [>> OFF]: Do not remove black setup.

SETUP REMOVE [> Setup rmv]: Determine whether or not to

ON (REMOVE) [>> ON]: Remove black setup.

remove black setup (7.5 IRE) from input analog video

 

signals when converting them into digital signals.

 

 

 

(For DSR-1500A only)

*OFF [>> OFF]: Do not add black setup.

SETUP ADD [> Setup add]: Determine whether or not to add

ON (ADD) [>> ON]: Add black setup.

black setup to analog video output signals.

 

 

 

(For DSR-1500A only)

*OFF [>> OFF]: Do not mute.

CC(F1) BLANK [> CC1 blank]: Select whether to mute the

ON [>> ON]: Mute.

closed caption signal to be superimposed on the 1st field

 

of the output video signal.

 

 

 

(For DSR-1500A only)

*OFF [>> OFF]: Do not mute.

CC(F2) BLANK [> CC2 blank]: Select whether to mute the

ON [>> ON]: Mute.

closed caption signal to be superimposed on the 2nd field

 

of the output video signal.

 

 

 

WIDE MODE [> Wide mode]: Determine whether to retain

*AUTO [>> Auto]: When video being recorded or played back

wide-screen aspect ratio information accompanying video

is accompanied by wide-screen aspect ratio information,

being recorded or played back.

retain the information.

 

OFF [>> OFF]: Ignore wide-screen aspect ratio information.

 

ON [>> ON]: Whenever recording or playing back video, retain

 

wide-screen aspect ratio information.

 

 

ESR MODE [> ESR mode]: Select whether to enable the edge

*OFF [>> OFF]: Do not enable.

subcarrier reducer (ESR).

ON [>> ON]: Enable.

 

When playing back a composite signal, set this to ON.

 

 

72 Menu Contents