2 With “SETUP MENU” selected, press the G button.
This displays all basic and enhanced items on menu level 1.
SETUP MENU |
|
|
|
|
| Menu grade | |
OPERATIONAL FUNCTION |
|
| |||||
DISPLAY CONTROL |
|
|
|
|
| Time counter display | |
TIME CODE |
|
|
|
|
| ||
|
|
|
|
|
| ||
TAPE PROTECTION |
|
|
|
|
|
| |
VIDEO CONTROL |
|
|
|
|
|
| |
AUDIO CONTROL |
|
|
|
|
|
| |
DIGITAL PROCESS |
|
|
|
|
|
| |
SETUP BANK OPERATION |
|
|
| ||||
|
|
|
|
|
|
|
|
MENU GRADE |
| ENHAN |
|
|
|
| |
|
|
|
|
|
|
| Current setting |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Monitor screen |
|
|
|
| |||
|
|
|
|
|
| ||
3 Follow the same procedure as in steps 3 to 8 of the procedure in the section “Changing the Settings of Basic Items” (page 80) using the fFgG buttons to select an item and change its setting.
4 When you have completed the settings, press the SET (YES) button.
The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the new settings are saved in memory.
When the saving operation is completed, the monitor screen and time counter display return to their normal indications.
Returning Menu Settings to Their Factory Default Settings
After making menu setting changes, to return settings to their factory default settings (setting initialization), use the following procedure.
To return a particular setting to its factory default setting
In the section “Changing the Settings of Basic Items” (page 80), carry out the procedure up to step 6, then with the current setting displayed (in the example, if the factory default setting has been changed, the current setting will be 100% or 50%), proceed as follows.
1 Either press the RESET (NO) button or select the default setting using the f or F button.
2 Press the SET (YES) button.
The setting returned to its factory default is saved in memory as the current setting.
To return all settings to their factory default settings
1 Press the MENU button in the menu control section.
The menu selection level display appears on the monitor screen.
2 Press the Gbutton to display level 1 of the setup menu. 3 Press the RESET (NO) button.
A message appears, to confirm whether or not you wish to return all settings to their factory default settings.
Monitor screen message | Message in the time |
| counter display |
|
|
INITIALIZE ALL ITEMS TO | Init setup? |
FACTORY PRESET |
|
VALLUES? |
|
|
|
4 Press the SET (YES) button.
The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory.
Note
If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the RESET (NO) button. The display returns to menu level 1, leaving the settings unchanged.
Settings Menu 4 Chapter
Changing Menu Settings 83