Sony DSR-1500A How to record ClipLink log data

How to record ClipLink log data

The following describes how to record the various ClipLink log data items.

OK/NG status

To designate a scene as “NG,” press the NG button on the camera while shooting the scene or at any time before you begin shooting the next scene.

All scenes that do not receive an “NG” designation are recorded as “OK” scenes.

(When you exit the VCR recording mode, changing the OK/NG status is no longer possible.)

Mark IN/OUT point time codes

This data is especially useful when shooting a video program for which a scenario has been created.

Set the camera to MARK mode before you start shooting. While shooting, each time you press the camera’s TAKE button, Mark IN and Mark OUT point time codes are recorded alternately.

	Index picture 1		Index picture 2
							End
Start
recording							recording
		Scene 1			Scene 2
		Take 1			Take 2
							Mark OUT
				Mark IN		(manual
			(manual			recording)
			recording)

Mark IN	Mark OUT
(manual
	(manual
recording)
	recording)

Cue point time codes

This type of data is especially useful when shooting scenes that may contain unexpected events, such as when shooting for sports coverage or documentaries.

Set the camera to CUE mode before you start shooting. While shooting, each time you press the camera’s TAKE button, the current time code is recorded as a cue point time code.

Start	Index picture 1	End
recording		recording

Scene 1

Take 1

					Rec	OUT
					(automatic
					recording)
			Cue point
			time code
				Cue point
			(manual
		Cue point
			recording)	time code
Rec	IN	time code		(manual
(automatic		(manual		recording)
recording)		recording)

Appendixes

118 ClipLink Guide